All the adrenaline of the legendary Apex competition series, in a lightweight, compact package. That’s the 60 APX outboard. It’s designed specifically for up-and-coming racers competing in UIM Formula 4 class competition, and has been expertly tuned to run at a wide-open throttle limit of 6000-6400 rpm. Built on a durable, proven four-stroke powerhead, the 60 APX can run out front all season long, while requiring minimal maintenance off the water. So racers can spend more hours where they belong: on the track, honing their skills.
Delivering race-winning performance in a lightweight, compact package, the 60 APX outboard motor brings a bold new look for the next generation of Wide Open.
|
6000-6400
FULL THROTTLE RPM |
60
RATED HP |
L4
CYLINDERS |
60.7 CID
DISPLACEMENT |
| Name | Description |
|---|---|
| TRIM SYSTEM | Power Trim and Tilt |
| MID SECTION | 15" Midsection with Solid Mounts Integral Power Trim System |
| BORE & STROKE | 2.56 x 2.95 IN/65 x 75 MM |
| INDUCTION SYSTEM | Long Runner Intake Manifold |
| FUEL REQUIREMENT | Unleaded Regular 87 Octane Minimum (R+M/2) Or 90 RON 10% Ethanol Maximum |
| FUEL SYSTEM | Electronic Fuel Injection (EFI) Computer Controlled |
| IGNITION SYSTEM | SmartCraft ECM 70 Digital Inductive |
| CHARGING | 18 AMP |
| STARTING | 12V Electric Start with SmartStart Protection |
| EXHAUST SYSTEM | Through Prop |
| OIL REQUIREMENT | NMMA Certified FCW SAE 10W-30 |
| GEAR RATIO | 1.83 |
| GEARCASE | 3.4" |
| DRY WEIGHT | 247 LBS |
| ENGINE TYPE | L4 |
| COOLING SYSTEM | Water-cooled with Thermostat Control |
| LUBRICATION SYSTEM | Structural Wet Sump |
| GEAR SHIFT | F-N-R |
| EMISSIONS LEVEL | CARB/EPA 3-Star EU RCD II |
| STEERING | Compatible with side-steering |
| STEERING ANGLE | +/- 30 degrees |
| OIL CAPACITY | 3.0 (qts) 2.8 (L) |
| THROTTLE AND SHIFT CONTROLS | Mechanical Throttle and Shift |
| IDLE RPM | 725 |
| TILT RANGE | 71° (-4° to 67°) |
| TRIME RANGE | 20° (-4° to 16°) |
| ENGINE MANAGEMENT SYSTEM | SmartCraft ECM 70 |
| ENGINE PROTECTION SYSTEM | SmartCraft Engine Guardian |
Answer a few questions and we'll get in touch with you!